Fiber Optic Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RS1600 Installation Manual

Communication Ports
4.2 Fiber Optic Ethernet Ports
Link
The following is the pin-out for the RJ45 male connector:
8
Figure 4.2
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack) and LC (Lucent Connector) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to
establish a proper link.
1
1
2
Figure 4.3
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
20
All manuals and user guides at all-guides.com
LED
1
RJ45 Ethernet Port Pin
Configuration
21)".
2
Tx Connector
Rx Connector
MTRJ Port
State
Off
Yellow (Solid)
Yellow (Blinking)
Off
Pin
1
2
3
4
5
6
7
8
Case
1
Tx Connector
1
Rx Connector
2
Figure 4.4
22)".
Description
The port is operating at 10 Mbps
Link established
Link activity
No link detected
Name Description
RX+ Receive Data+
RX- Receive Data-
TX+ Transmit Data+
Reserved (Do Not Connect)
Reserved (Do Not Connect)
TX- Transmit Data-
Reserved (Do Not Connect)
Reserved (Do Not Connect)
Shield (Chassis Ground)
"Copper Ethernet
2
LC Port
"Fiber Optic
RUGGEDCOM RS1600
Installation Manual, 01/2021, C79000-G8976-1013-03