Regency City Series Owners & Installation Manual page 92

CITY SERIES
installation
9. After applying the finishing material to the framing kit.—secure TV kit
trim piece with 2 screws as shown below.
Install trim with 2 screws
*See manual for minimum TV mounting height.
92 | City Series CB40E-12
919-689b
10. When using wall finishes other than Regency's wall panels, in conjunction
with the compact/extended framing kit, adhere to the measurements
shown below, for the TV wiring kit.
Follow these instructions if choosing to use your own framing
materials.
11. Frame the opening: 10" W x 7-5/8" H (254mm W x 194mm H).
The finishing trim kit for this TV box is 1-1/2" (38mm) deep and de-
signed flush to the front of the finished material. The framed opening
should be 1-1/2 inches (38mm) deeper than all other framing around
the appliance, minus the finished material thickness. (i.e.: If finished
material is 1/2" (12mm) thick, the framed opening should be 1 inch
[25mm] deep.)
Item Part #
1 N/A
2 N/A
3 656-244
12. Secure TV box to framing with 2 screws per side. See below.
13. Repeat steps 3-8 for all electrical/PVR etc. connections.
14. After applying the finishing material to the framing kit - secure TV kit
trim piece with 2 screws as shown above. See step 9.
*See manual for minimum TV mounting height.
2
1
2
3
Description
10"
7-5/8"
1-1/2" Deep Trim Kit
06.12.17