Regency City Series Owners & Installation Manual page 86

CITY LINE
installation
8. Place the split end of Log 3 to the right front corner of the burner—angle
the log so that the other end is sitting approximately 1/2" (13mm) from
the edge of the burner tray.
3
Log 3 placement
9. Place Log 6 and Log 7 on the burner locations shown below.
10. Before placing the next log, spread the optional media evenly on the
burner tray as shown.
6
NOTE: Ensure the installed optional media doesn't completely block the
air flow; more than 50% of the airflow must be open (shown with 3/4"
crushed black glass).
Do not completely
block air flow
11. Place Log 4 by identifying the pin locator and matching it with the
left side pin on Log 1.
86 | City Series CB40E-12
919-651b
Log to corner
of burner
3/4" crushed
black glass
7
Pin in Log 1
4
Rest the other end of Log 4 on the indent in Log 2 as shown below.
4
12. Place Log 5 by identifying the pin locator and matching it with the
right side pin on Log 1.
Pin in Log 1
1
Rest the other end of Log 5 on the indent in Log 3 as shown below.
13. Add lava rock sparsely around the perimeter of the burner.
Completed Install
2
Indent Log 2
2
5
Indent on
3
5
3
log 3
10.03.18