Regency City Series Owners & Installation Manual page 23

5. Ensure all 7 front clamps are in the open position to allow clearance for
the glass.
6. Lift up the front panel using the supplied vacuum clamps and position into
the lower front channel–ensure the front panel is accurately centered—with
the front panel in position—secure in place by closing the 3 lower clamps
and 4 upper clamps.
Press glass vacuum clamps (part # 948-078/pair) in open position firmly onto
surface of glass. Bring handles together to close.
Open
Handle front panel with supplied vacuum clamps
Open clamps
prior to
placing front
glass panel
Closed
Note: Ensure that the front glass is centered and evenly spaced with side
glass (3 sided unit) - open to release glass clamps to remove from surface
of glass.
Open clamps to
release pressure
on the springs
7. Return to the side panel(s), and release the upper and lower clamps. The
springs will release and push the glass side panel forward slightly—this
will create a seal between the front and side panels. When the junction
between the front and side glass panels is sealed, close the clamps to
secure the side panel(s) in place.
8. To remove the glass panels—always remove the side panel(s) (for 3 sided
units) before removing the front panel.
9. Reverse steps to remove glass.
owner's information
City Series CB40E-12 | 23