Testing Interface - ICP DAS USA I-7530 Series User Manual

Uart to can bus

Hide thumbs Also See for I-7530 Series:

Table of Contents

3.6 Testing interface



Step 1. Set the Init/Normal of DIP switch in the CAN converter to Normal mode, and

power on the CAN converter again.



Step 2. Connect the COM port of the PC to the CAN converter and execute the

VxCAN Utility.



Step 3. Click the search button

the PC.



Step 4. The search list on the left will list the CAN modules that have been

searched by the PC.



Step 5. Click the CAN communication port of the CAN converter and select the parameters

be used of the CAN converter, and then check the "Active Port" and click the "Confirm"

button.

I-7530, I-7530A, I-7565, I-7530-FT, tM-7530, tM-7530A, tM-7565 User Manual Version 1.6

to search for all CAN converters connected to

Page:

Table of Contents

I-7530I-7530a I-7565 I-7530-ft Tm-7530 Tm-7530a ... Show all