ICP DAS USA I-7530 Series User Manual page 64

Code BB
0D
0E

Response:
Valid command: No response, and will automatically restart after writing the configuration
parameters of the UART
Invalid command: ?<Error Code><CR>

Note:
In order to communicate with the computer to receive error information, the user must
enable the "Error Response" function in the CAN converter software. In addition, in
firmware 2.X or earlier, the I-7565 only supports a baud rate of 921600 bps.

Example:
Command: P00B30000<CR>
Set RS-232/RS-485/RS-422/USB baud rate=115.2K, data bit=8, stop bit=1, none
parity, none checksum to the CAN converter and no error return, th e CAN converter
will reboot and use these parameters
I-7530, I-7530A, I-7565, I-7530-FT, tM-7530, tM-7530A, tM-7565 User Manual Version 1.6
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved E-mail: service@icpdas.com
(Only supports I-7565, tM-7530, tM-7530A and tM-7565)
UART baud rate 460800 bps
(Only supports I-7565 and tM-7565 after firmware version v3.9)
UART baud rate 921600
(Only supports I-7565 and tM-7565 after firmware version v3.9)
Description
64
Page: