Setup In Ipl - Intermec EasyCoder PF2i Installation Instructions Manual

5

Setup in IPL

This chapter explains how to set up the wireless
network communication in printers running IPL
v2.40 (or later). The only requirement on the PC side
is a terminal program that can transmit and receive
ASCII characters on an RS-232 line. Thus, this
method is recommended when you do not have the
opportunity to run the PrintSet program, for example
because you use some other operating system than
Windows.
For information on how to set up the network
communication in printers running Fingerprint, refer
to Chapter 4, "Setup in Fingerprint."
EasyLAN Wireless Interface Kit Installation Instructions