Reading The Ip Address - Intermec EasyCoder PF2i Installation Instructions Manual

SETUP:
These menus will only be displayed when an optional EasyLAN interface board is installed.
NETWORK
NETWORK: NETWORK:
IP SELECTION IP ADDRESS
IP SELECTION: IP ADDRESS:
DHCP+BOOTP 192.168.1.79
PARITY:
MANUAL
PARITY:
Read-only
DHCP
PARITY:
BOOTP
Example of the network setup when an automatic IP selection method is used.
SETUP:
These menus will only be displayed when an optional EasyLAN interface board is installed.
NETWORK
NETWORK: NETWORK:
IP SELECTION IP ADDRESS
IP SELECTION: IP ADDRESS:
MANUAL 0.0.0.0
PARITY:
DHCP
PARITY:
Read-only
BOOTP
PARITY:
DHCP+BOOTP
Example of the network setup when the manual IP selection method is used or when
the network does not have an DHCP or BOOTP server.
4 Press the  key. The display shows the default setting:
IP SELECTION:
DHCP+BOOTP
5 Here, you can select the method for assigning the IP address for the
printer as discussed earlier. There are four options; DHCP+BOOTP,
MANUAL, DHCP, and BOOTP. If you do not use a DHCP or
BOOTP server, you can either set the IP address manually or use the
ARP'n'PING method.
6 Use the  or  keys to browse through the options. When the desired
option is displayed, press the <Enter> key.

Reading the IP Address

1 After having selected the method for assigning the IP address, the
display shows:
NETWORK:
IP ADDRESS
EasyLAN Wireless Interface Kit Installation Instructions
NETWORK: NETWORK:
NETMASK DEFAULT ROUTER
NETMASK: DEFAULT ROUTER:
255.255.255.0 192.168.1.1
Read-only Read-only
NETWORK: NETWORK:
NETMASK DEFAULT ROUTER
NETMASK: DEFAULT ROUTER:
0.0.0.0 0.0.0.0
Read-only Read-only
Chapter  — Setup in IPL
NETWORK: NETWORK:
NAMESERVER MAC ADDRESS
NAMESERVER: MAC ADDRESS:
192.168.1.7 00104017b80e
Read-only Read-only
NETWORK: NETWORK:
NAMESERVER MAC ADDRESS
NAMESERVER: MAC ADDRESS:
0.0.0.0 00104017b80e
Read-only Read-only