Table of Contents
Advertisement
I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKET INSTALLATION
Insert the Omega Brackets into the matching holes on the bottom of the fixture. Secure the
Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn clockwise. Always
check to make sure that each fastener is completely locked. Omega brackets can be
installed into the underside of the fixture's base as illustrated below.
CLAMP INSTALLATION
When mounting the fixture to a truss, be sure to secure appropriately rated professional
grade rigging clamps to the included Omega Brackets using an M10 screw fitted through the
center hole of the Omega Brackets. This fixture requires the installation of two Omega
brackets and two clamps for secure truss mounting. The fixture also provides built-in rig-
ging points for a SAFETY CABLE. Be sure to only use the designated rigging point for the
safety cable and never secure a safety cable to a carrying handle.
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL
NOT FALL IF THE CLAMP FAILS.
ART-NET | sACN CONNECTION
When connecting fixture to a network switch to control multiple devices, a Gigabit Ethernet
Switch that supports IGMP (Internet Group Management Protocol) is required. Using a
Gigabit Ethernet Switch that does not support IGMP can cause erratic behavior of all con-
nected devices to the switch. Click link below for more information about IGMP.
https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
11
Advertisement
Table of Contents
