Intermec EasyCoder 501XP Programmer's Reference Manual page 61

<fi eld>% = FIELDNO
<fi eld>
Example:
In this example, the text "Month" is kept in the image buffer, whereas
the names of the months are cleared from the image buffer, one after the
other, as soon as they have been printed:
FT "Swiss 721 Bold BT" ↵
MAG 2,2 ↵
PP 100,300 ↵
PT "MONTH:" ↵
PP 100,200 ↵
A%=FIELDNO ↵
PT "JANUARY":PF ↵
CLL A% ↵
PP 100,200 ↵
PT "FEBRUARY":PF ↵
CLL A% ↵
PP 100,200 ↵
PT "MARCH":PF ↵
CLL A% ↵
Note: Using command abbreviations instead of full command
names, for example
printing.
Note: If a label has been printed using a predefi ned layout
and you want to return to the method of printing labels using
layout and printable data in one sequence, the predefi ned
layout must fi rst be cleared from the printer's working memory
using the instruction:
Intermec Direct Protocol v7.80 Programmer's Reference Manual
Chapter 5 — Feeding & Printing Instructions
is the same alphanumeric designator as in the corresponding CLL instruction
followed by a mandatory % sign.
instead of
PF
LAYOUT RUN ""
, speeds up batch
PRINTFEED
55