Summary
To create a text fi eld, the following formatting instructions must be given
(in most cases default values may substitute missing parameters). Input
data to the fi eld and printing instructions are explained in Chapters 4.9
and 5.2 respectively.
Purpose
X/Y Position
Alignment
Direction
Font
[Magnifi cation]
Appearance
Example:
PP 200,500:AN 7:DIR 2:FT "Swiss 721 BT",18:II ↵
Intermec Direct Protocol v7.80 Programmer's Reference Manual
Instruction
PP (PRPOS)
AN (ALIGN)
DIR
FT (FONT)
MAG
II (INVIMAGE)
NI (NORIMAGE )
Chapter 4 — Label Design
Default
0/0
1
1
Swiss 721 BT,
12,0,100
1,1
off
on
Remarks
Number of dots
Select AN 1-9
Select DIR 1-4
Height 1-4, Width
1-4
White-on-black
Black-on-white
31