Instructions In Alphabetical Order - Intermec EasyCoder 501XP Programmer's Reference Manual

Chapter 12 — Reference Lists

12.1 Instructions in Alphabetical Order

Instruction
ALIGN (AN)
BARFONT (BF)
BARFONT (BF) ON/OFF 4.4
BARHEIGHT (BH)
BARMAG (BM)
BARRATIO (BR)
BARSET
BARTYPE (BT)
BEEP
BREAK
BREAK ON/OFF
CLEANFEED
CLIP
CLL
COPY
COUNT&
CUT
CUT ON/OFF
124 Intermec Direct Protocol v7.80 Programmer's Reference Manual
Chapter Purpose
4.2 Specifying which part (anchor point) of a
text, bar code field, image field, line, or box
will be positioned at the insertion point.
4.4 Specifying fonts for the printing of bar code
interpretation.
Enabling/disabling the printing of bar code
interpretation.
4.4 Specifying the height of a bar code.
4.4 Specifying the magnification in regard of
width of the bars in a bar code.
4.4 Specifying the ratio between the wide and the
narrow bars in a bar code.
4.4, 9.1 Specifying a bar code and setting additional
parameters to complex bar codes.
4.4 Specifying the type of bar code.
6.10 Ordering the printer to emit a beep.
6.18 Specifying a break interrupt character
separately for the keyboard and each serial
communication channel.
6.18 Enabling/disabling break interrupt separately
for the keyboard and each serial communica-
tion channel.
5.1 Running the printer's feed mechanism.
4.2 Enabling/disabling partial fields.
5.3 Partial or complete clearing of the print image
buffer.
8.3 Copying files.
6.6 Creating a counter.
5.1 Activating an optional paper cutting device.
6.8 Enabling/disabling automatic cutting after
PRINTFEED execution and optionally
adjusting the media feed before and after the
cutting.