ADTRAN NetVanta 950 IAD Quick Configuration Manual page 17

Hide thumbs Also See for NetVanta 950 IAD:

Create the PVC and Assign an IP Address

1. Enter interface fr 1.1 to create the first PVC assigned to Frame Relay virtual interface 1. This

activates the configuration parameters for the PVC. Your prompt should now display IAD

(config-fr1.1)#.

2. Enter frame-relay interface-dlci 16 to assign DLCI 16 to this PVC. (DLCIs should be

supplied by your network provider.)

3. Enter ip address 192.22.72.1 255.255.255.0 to assign an IP address of 192.22.72.1 for this

PVC using a 24-bit subnet mask.

4. Enter exit to return to the Global Configuration mode.

Configure the PPP Virtual Interface

The following steps outline configuring a PPP Virtual interface (labeled 1) to the NetVanta 950 IAD.

The following steps assume the Global Configuration mode is currently active. Verify the

prompt of the unit displays (config)#.

1. Enter the interface ppp 1 to create a PPP virtual interface labeled 1.

2. Enter ip address 192.22.72.1 255.255.255.0 to assign an IP address to the PPP endpoint

using a 24-bit mask.

3. Enter no shutdown to activate the interface to pass data.

4. Enter exit to return to the Global Configuration mode.

Create a T1 to Virtual Interface Cross-Connect

For this example we will configure a T1 WAN interface with DS0s 1 through 10 for data. The

following steps assume the Global Configuration mode is currently active. Verify that the

prompt of your unit displays (config)#.

1. Enter interface t1 0/1 to activate the interface configuration mode for the T1 WAN interface.

2. Enter tdm-group 1 timeslots 1-10 to create a TDM group for DS0s 1 through 10 (the data

DS0s) on the T1 network connection (t1 0/1).

3. Enter exit to return to the Global Configuration mode.

4. Enter cross-connect 1 t1 0/1 1 frame-relay 1 to connect DS0s 1 through 10 of the T1

network connection (t1 0/1) to the virtual Frame Relay interface fr 1.16.

Alternately,

5. Enter cross-connect 1 t1 0/1 1 ppp 1 to connect DS0s 1 through 10 of the T1 network

connection (t1 0/1) to the virtual PPP interface labeled 1.

Create a T1 to FXS Cross-Connect

61200788L1-42A

Technical Support 1-888-4ADTRAN (1-888-423-8726)