ADTRAN NetVanta 950 IAD Quick Configuration Manual page 13

T1 Interface Configuration
1. Use the screen below to edit the settings on the T1 interface.
2. Click on Apply to accept the current configuration changes.
You must to click Save to write the new settings into NVRAM (refer to Save the Configuration
on page 19).
3. Optional: For voice applications only, it may be necessary to preserve robbed-bit signaling
(RBS) between the T1 ports. Be sure to click on
RBS on this connection.
61200788L1-42A Technical Support 1-888-4ADTRAN (1-888-423-8726)
Signaling (refer to page 7) to preserve
RBS
13