ADTRAN NetVanta 950 IAD Quick Configuration Manual page 16

Hide thumbs Also See for NetVanta 950 IAD:

Configure a Telnet Session

The following steps show how to access the Telnet configuration parameters and change the password.

The default password for initializing a Telnet session is password (all lower case). For security purposes,

change the password to something unique. For this example, replace the underlined word with a

password of your choosing. The NetVanta supports five Telnet sessions (0 through 4).

1. Enter line telnet 0 to activate the configuration parameters for the Telnet sessions at the

(config)# prompt.

2. Enter login to prompt the user for a Telnet access password.

3. Enter password word to create a login password for the Telnet sessions.

4. Enter exit to return to the Global Configuration mode.

An Enable Security mode password must be defined before configured Telnet sessions are

activated. Refer to Enable Security Mode Password for information on password

configuration.

Enable Security Mode Password

1. Verify that the prompt of your unit displays (config)#.

2. Enter enable password word to set the Enable Security mode password.

3. Enter enable password md5 word to encrypt the enable password using MD5 encryption.

The enable security mode passwords are case sensitive.

Configure the Frame Relay Virtual Interface

The following steps outline configuring a Frame Relay virtual interface (labeled 1) using a single

DLCI back to the corporate router (defined as DLCI 16).

The following steps assume the Global Configuration mode is currently active. Verify the

prompt of your unit displays (config)#.

Create the Interface and Define the Encapsulation

1. Enter interface fr 1 to create a Frame Relay virtual interface labeled 1.

2. Enter frame-relay lmi-type ansi to configure Frame Relay virtual interface 1 to use ANSI

(Annex D) signaling. The default LMI type is Cisco.

3. Enter no shutdown to activate the interface to pass data.

4. Enter exit to return to the Global Configuration mode.

Technical Support 1-888-4ADTRAN (1-888-423-8726)

61200788L1-42A