Advertisement
3. From this screen, you can use the Configured DS0 Connections box to create a connection
from any DS0 on this T1 port to a virtual or physical interface.
4. Select the range of DS0s and the destination interface from the pull-down menu.
5. Optional: Specifying the Starting
robbed-bit signaling with voice applications).
6. Click on
dd to create the connection.
A
7. Once the connection has been created, the Web GUI forwards you to the configuration page
for the selected interface (refer to the configuration examples on pages 8 through 14).
The new connection should appear at the bottom of the Configured DS0 Connections box. If
not, please refer to the error message and correct the settings.
61200788L1-42A
and
DS0
RBS
Technical Support 1-888-4ADTRAN (1-888-423-8726)
Signaling (RBS is optional and is used for
7
Advertisement
