Installation; Open Lock With Administrator Code; Set Up - Securam SH-WB01 Manual

3. Installation:

Download the SECURAM Guard App from the App Store or Google Play Store.
QR Code:
Website Link: https://securamsys.com/app/
Follow the instructions in the app to install the SECURAM EOS.
4. To open the lock with the default Administrator Code:
The default Administrator code is 123456.
Enter 123456 then  button, to open the lock using the default Administrator code.
I. Set Up:
The easiest way to set up your SECURAM EOS is to follow the voice guidance.
Press the Function  button to begin:

Add User Press 2 - To add the first user – Administrator
o Add User
o Enter code – enter the admin code – the default is 123456, then press 
o Lock should say "Verified Successfully, Enroll the Administrator first"
To Enroll Administrator, please follow the steps as prompted by the lock:
o The lock will say "Place first finger" – place your finger on the fingerprint reader located
on the top of the touchpad. Follow the instructions to lift and place finger on the
reader until "Finger enrolled successfully" is announced.
Lock will ask you to place a second finger.
Note: if you do not want to add a fingerprint for a user, press  to skip
o "Place second finger" – place a second finger on the fingerprint reader
o Place finger and lift finger as instructed
o Lock will announce "Fingerprint enrolled successfully"
o Lock will ask you if you want to Enroll a Code
5