Securam ScanLogic Basic Programming Instruction

Programming

ScanLogic Basic
A. Open lock
1) Enter default Manager code 123456
B. Change Code
1) Enter 000000
2) Enter existing code, 1 beep
3) Enter new 6 digit code, 1 beep
4) Repeat new 6 digit code, 2 beeps
*Manager code of 123456 must be changed before
any other Users can be added
**Reset Code must be changed from default
***1 long beep means code is not allowed
C. Add Manager fingerprint(s)
1) Open with Manager code/fingerprint
2) Hold "+," and hold until 1 beep
3) Place fingerprint 4X, 1 beep each
4) 2 beeps confirms fingerprint addition
*Manager can add up to 5 fingerprints
D. Add User1 Code
1) Open with Manager code/fingerprint
2) Hold "1," 1 beep
3) Enter new 6 digit code, 1 beep
4) Repeat new 6 digit code, 2 beeps
E. Add User2 Code
1) Open with User1 code/fingerprint
2) Hold "1," 1 beep
3) Enter new 6 digit code, 1 beep
4) Repeat new 6 digit code, 2 beeps
F. Add fingerprints
5) Open with own code/fingerprint
6) Hold "+," 1 beep
7) Place fingerprint 4X, 1 beep each
8) 2 beeps confirms fingerprint addition
*User1 and User2 can add up to 5 fingerprints
G. Delete own fingerprints
1) Open with your own code/fingerprint
2) Hold "-", 2 beeps
*All of your fingerprints have been deleted
**The Reset Code must be changed from default 999999 to a unique
number. Follow the Change Code process detailed in Item "B." below.
(All)
H. Delete User2
(Code & fingerprints)
1) Open with User1 code/fingerprint
2) Hold "3", 2 beeps
*User2 code and fingerprints are deleted
I. Delete All
(Codes/fingerprints)
1) Open with manager code/fingerprint
2) Hold "3", 2 beeps
*Manager code remains unchanged, User1 and
User2 are deleted
J. Reset
(resets codes to factory default)
1) Input reset code, default is 999999
2) Hold "6", 2 beeps
*Lock is in default mode, Manager code reverts to
123456, Reset code remains unchanged
K. Turn beeper off
1) Open with Manager or User1
code/fingerprint
2) Hold "4," 1 beep
L. Turn beeper on
1) Open with Manager or User1
code/fingerprint
2) Hold "4," 2 beeps
Security Levels:
Security Level 1 = Fingerprint or code
Security Level 2 = Fingerprint and code
M. Change to Security Level 2
code)
1) Open with Manager or User1
code/fingerprint
2) Hold "5," 1 beep, then 2 beeps
N. Change to Security Level 1
code)
1) Open with Manager or User1 code and
fingerprint
2) Hold "5," 1 beep, then 1 beep
(fingerprint and
(fingerprint or