Securam MANAGER Series Operating

SafeLogic TopLit Series -MANAGER- Operating
This MANAGER INSERT is for the SafeLogic TopLit Series EC-0601A-PL EntryPad used in
conjunction with EL-0601, EL-0701, or EL-0801 lock bodies.
In some instances the Manager Code and associated Operating Instructions are not issued
to the End User. In this case, simply remove this insert from the Operating Instruction.

1. Manufacturer default codes

The SafeLogic Series safe lock system comes with two codes the Manager Code and the
User Code as follows:
a. The Manager Code is set to 1-1-1-1-1-1
b. The User Code is set to 1-2-3-4-5-6

2. Functions of the Manager Code

a. Unlock safe lock system
b. Change Manager Code
c. Add or Delete the User Code
d. Enable or Disable the User Code

MANAGER PROGRAMMING INSTRUCTIONS


ALWAYS PERFORM OPERATIONS WITH THE SAFE LOCK SYSTEM UNLOCK AND
THE SAFE DOOR OPEN.

Before closing the door, make sure all the program changes are correct.

The system will not allow the Manager Code or User Code to be set to six zeros.

1. To Change the Manager Code

a) Enter "0" six times. Two beeps will sound, indicating the entry is valid and the system is
awaiting the code change.
b) Next, enter the existing six (6) digit code. Two beeps will sound, indicating the entry is
valid.
c) Enter the new six (6) digit code. One beep will sound, indicating the entry is valid.
d) Re-enter the new six (6) digit code. One beep will sound, indicating the codes entered in
steps c and d are the same and the code changing process is successful.
e) If Three Beeps sound, the code change process has been unsuccessful. The existing code
is still valid. Repeat steps a to d.
Note:

Verify the new code at least 3 times before closing the door to make sure the code has
Doc.No.:PLM-EC0601APL201222
Version No.: V1.00 Manager Insert
1