Securam Basic User Instructions

Unit 19/80 Mills Rd, Braeside Vic 3195
ABN 62 123 602 782
OPENING THE LOCK
1. Enter valid six (6) digit combination (factory set to 1-2-3-4-5-6).
2. The lock will confirm a valid combination entry with a double signal.
3. Within four (4) seconds, turn the handle to the open position.
4. Pull door open.
• Invalid Combination Entry - Lock will signal three (3) times.
WRONG TRY PENALTY
• Entry of four (4) consecutive invalid combinations starts a five (5) minute
delay period.
- LED flashes red at ten (10) second intervals.
• At the end of the delay period, two (2) more consecutive invalid combinations
will restart the additional five (5) minute delay period.
Entry will not respond to keystrokes during delay period.
www.unitedsafes.com
Securam Basic User
Instructions
FEATURES
USER COMBINATION
• Open Lock
• Change Combination
WRONG TRY PENALTY
• Four (4) consecutive invalid combination
LOW BATTERY WARNING
• Repeated LED flashing and beeping during
AUDIO AND VISUAL SIGNAL
• Double signal - two (2) LED flashes and two
• Triple signal - three (3) LED flashes and
initiates five (5) minute delay period.
opening indicates battery is low and needs
immediate replacement.
(2) beeps - indicates entry is valid
or accepted.
three (3) beeps - indicates invalid or
not accepted.
Phone: 03 9761 1295
E: service@unitedsafes.com