Table of Contents
Advertisement
■ Changes or modifications not expressly approved by ADTRAN will void the warranty.
■ This equipment contains no parts that can be serviced by the user.
g
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense. CAN ICES-003 (A)/NMB-003(A)
■ This product is NRTL Listed to the applicable UL/CSA Standards. This product has also been evaluated to applicable international standards for CE
marking and RCM marking.
■ This product meets EU RoHS Directive. Refer to
Environment
■ Operating Temperature: 32°F to 113°F (0°C to 45°C)
■ Storage Temperature: -40°F to 158°F (-40°C to 70°C)
■ Relative Humidity: 10 to 95 percent, non-condensing
f
CAUTION!
This product is intended for business deployment. Care should be taken to protect cables from damage or vandalism.
The product is designed to meet the following environmental classes:
■ ETSI EN 300 019-1-1 "Classification of environmental conditions; Storage", Class 1.2
■ ETSI EN 300 019-1-2 "Classification of environmental conditions, Transportation", Class 2.3
■ ETSI EN 300 019-1-3 "Classification of environmental conditions, Stationary use at weather protected locations", Class 3.1
■ The device is designed to function without degradation during the exposure to all test severities per 3.1of ETSI EN 300 019-1-3.
Electrical
■ Power Supply: 100 to 240 VAC, 50-60 Hz, 0.6A
f
CAUTION!
Electrostatic Discharge (ESD) can damage electronic devices. When handling devices, wear an antistatic discharge wrist strap to prevent damage to
electronic components. Place in antistatic packing material when transporting or storing. When installing or maintaining, always place devices on an
approved antistatic mat that is electrically grounded.
The following configuration guides provide additional
information for this ADTRAN product (available online at
https://supportcommunity.adtran.com).
Configuring the CLI in ASE
Configuring QoS in ASE
Configuring Layer 2 Services in ASE
Configuring DHCP in ASE
Configuring MRP and MVRP in ASE
ASE Command Reference Guide
For ADTRAN training inquiries, visit:
training
Warranty: ADTRAN will replace or repair this product within the warranty period if it does not
meet its published specifications or fails while in service. Warranty information can be
found online at www.adtran.com/warranty.
Trademarks: Brand names and product names included in this document are trademarks,
registered trademarks, or trade names of their respective holders.
Copyright © 2021 ADTRAN, Inc. All Rights Reserved.
www.adtran.com/environmental
Access additional safety information and product documentation using the
QR code or website
http://adtran.com/
for further information on RoHS/WEEE.
.
https://supportcommunity.adtran.com
PRICING AND AVAILABILITY 1.800.827.0807
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY
HANDLING PRECAUTIONS REQUIRED
ADTRAN CUSTOMER CARE:
From within the U.S.
1.888.423.8726
From outside the U.S. +1 256.963.8716
*617101561F1-13A*
Advertisement
Table of Contents
