Peek Material Printing Precautions - IEMAI MAGIC-HT-L Operating Instructions Manual

5.5 PEEK Material Printing Precautions

Material/Parameter
peek
Print Temperature
440
1. PEEK can only use high-temperature head printing
2.Pre-heat before printing, should first heat the thermostat chamber and hot bed, the
print head should not be heated for a long-time, long-time heating is easy to form
carbonization lead to print head clogging
3. Before printing the material should first use 120 ℃ baking 5H
Platform Temperature
100
Attention:
(clogging treatment see common problems
and their solutions - PEEK printing)
4. printing when the cooling fan off
22
Print More Materials, All For Application
Chamber Temperature
90