4.2 How to Calibrate
Step 1
1.
After completing the basic
leveling in step 4.1
You need to click Leveling
2.
Step 4
Click on the arrow
1.
Step 2
Click on the arrow
1.
Step 5
1.
The system automatically
moves to the next point
Refer to "Step 3" for operation
2.
15
Print More Materials, All For Application
Step 3
1.
The system automatically moves
to the last point.
2.
After stopping the movement
Use the stopper to adjust the
3.
distance between the platform
and the nozzle to 0.1mm by
rotating the butterfly nut at the
bottom of the platform.
Step 6
1.
Click the arrow to complete the
leveling of the remaining 3 points
in turn.
(When the first leveling
distance is too large, it is
recommended to perform
second leveling operations)