Print Operation; Use Of The Printing Platform - IEMAI MAGIC-HT-PRO Operating Instructions Manual

4. Print Operation

4.1 Use of The Printing Platform

Step 1
1. When you receive the device,
the platform is installed, if you
want to disassemble it, please
hold the front wrench, and pull
it forward to install it, then
align the snap position and
push it inward.
Step 2
1. As shown in the picture for the
platform of the nine positioning
screws will build the platform
positioning slot aligned with the
positioning screws to push
inward can be successfully
installed
15
Print More Materials, All For Application
Step 3
1. Find the platform glue in the
kit, and after the platform cools
down, apply three layers to the
area to be printed: horizontal,
vertical and diagonal to warm
up.