Table of Contents
Advertisement
Quick Links
Print More Materials, All For Application
HIGH TEMPERATURE SERIES
3D PRINTER
MAGIC-HT-M
Operating Instructions
* Please read this manual carefully before starting to operate.
Warning
This device is a Class A product. Use in a general indoor environment
may cause radio interference and therefore requires the user to take
appropriate protective measures.
www.iemai3d.com
Advertisement
Table of Contents
Related Manuals for IEMAI MAGIC-HT-M
Summary of Contents for IEMAI MAGIC-HT-M
- Page 1 Print More Materials, All For Application HIGH TEMPERATURE SERIES 3D PRINTER MAGIC-HT-M Operating Instructions * Please read this manual carefully before starting to operate. Warning This device is a Class A product. Use in a general indoor environment may cause radio interference and therefore requires the user to take appropriate protective measures.
- Page 2 Print More Materials, All For Application The contents of this operating instructions may be updated periodically. Scan the QR code or visit the link below to get the latest version. www.iemai3d.com/index.php/download/...
-
Page 3: Table Of Contents
Print More Materials, All For Application Content 1．Overview ......................................1 1.1 Machine Overview .................................. 1 1.2 Precautions ....................................2 1.3 Safety ......................................3 2. Detailed Parameter ....................................4 2.1. Specification .....................................4 2.2 Device Layout................................... 6 2.3 Interactive Interface ................................8 3.Device Usage ...................................... 12 3.1 Unboxing for The First Time ..............................12 3.2 Device Movement Check ..............................13 4. -
Page 4: 1．Overview
1．Overview 1.1 Machine Overview IEMAI's High-Performance 3D printer MAGIC-HT-M is a 3D printing device based on the principle of fused filament deposition (FFF) technology, with a printing temperature of up to 450°C, a hot bed temperature of 150 ° C, and a cavity temperature of 90 ° C. It supports most polymer 3D printing materials on the market, including PEEK, PEKK, PPSU, ULTEM etc., creating excellent... -
Page 5: Precautions
Print More Materials, All For Application 1.2 Precautions First of all, thank you for choosing IEMAI 3D Printer！ This device is a Professional equipment, please read this manual carefully before starting to use, this manual contains important information about the installation, operation, maintenance, and common problems of the 3D printer, the company is not responsible for all losses caused by violation of the cautions and operating procedures given in this manual。... -
Page 6: Safety
Print More Materials, All For Application 1.3 Safety The device has a specialized motion structure, control system and electrical control parts, users need to pay careful attention to the safety label when using it to prevent burns, pinching, electric shock, or other safety problems. The maximum temperature of the print head of this equipment can reach 450°... -
Page 7: Detailed Parameter
Print More Materials, All For Application 2. Detailed Parameter 2.1. Specification... - Page 8 Print More Materials, All For Application...
-
Page 9: Device Layout
Print More Materials, All For Application 2.2 Device Layout Control Panel Switch Handle（Carry Machine）... - Page 10 Print More Materials, All For Application Top Window Filament Box Handle（Carry Machine） Motherboard Cooling Cooling Fan Main Switch...
-
Page 11: Interactive Interface
Print More Materials, All For Application 2.3 Interactive Interface The interactive Interface of this device adopts a 3.5-inch Color Touch Screen (Resistive), please read the following instructions carefully before first use Logic diagram of interactive interface... - Page 12 Print More Materials, All For Application 2.3.1 System Interface Figure 1: Main interface Figure 2: System interface Figure 3: Info interface Click "Info" to go to Figure 3 This interface allows you to view Click "System" to go to Figure 2 the current coordinates of the 2.
- Page 13 Print More Materials, All For Application 2.3.2 Tool interface Figure 1: Main interface Figure 2: Tool Interface Figure 3：Manual Click "Tool" to go to Figure 2 Click "Manual" to go to Figure 3 Here can do the following Click "Preheat" to go to Figure 4 Select the moving unit of 0.1-10mm Click "Filament”...
- Page 14 Print More Materials, All For Application 2.3.3 Print Interface Figure 1: Main Interface Figure 2: File Interface Figure 3: Print Interface Click "Print" to go to Figure 2 Check Specify G-code file to print or This interface is the main delete the file interface in print You can view thumbnails...
-
Page 15: Device Usage
Print More Materials, All For Application 3.Device Usage 3.1 Unboxing for The First Time Step 1 Step 2 Step 3 Check if the packaging is The equipment is tightly packed Check The Door Glass, Whether complete and protected the Control Panel is Segmentation If there is a damage, please Please be patient in removing... -
Page 16: Device Movement Check
Print More Materials, All For Application 3.2 Device Movement Check Step 1 Step 2 Step 3 As shown in the diagram Under normal condition, all lights of the device are lit as Connect the device power to shown in the figure the cradle power Click the Z-axis up and down respectively. -
Page 17: Print Operation
Print More Materials, All For Application 4. Print Operation 4.1 Operation of Auto-Calibration 1. Carry out the basic leveling of the Step 2 Step 3 platform to ensure that the basic leveling of the platform will not be excessively inclined Step 1 Raise z-axis platform Use fixed height objects as... - Page 18 Print More Materials, All For Application 2. Click the leveling button to use automatic leveling to get the platform data. Wait for the printer to automatically measure the platform 49 each test point. 3. Start printing and Z-axis compensation After testing the printing platform, you can start printing. If you find that the nozzle and platform spacing is not ideal during the printing process, you can open and change the data in the file of "Automatic leveling...
-
Page 19: Unload Filament
Print More Materials, All For Application 4.2.1 Unload Filament Step 2 Step 3 Step 1 Pre-heataccording material to be loaded Straighten the material Load the material through the Refer to Step 10 for the Cut the material to the tip break test port preheating temperature... - Page 20 Print More Materials, All For Application Step 10: Recommended preheating nozzle temperature for commonly used materials Super Performence Reinforced Composites General engineering materials PEEK：430℃ CF-PEEK/GF-PEEK：450℃ PA：260℃ PEKK：430℃ CF-PEKK/ESD-PEKK：430℃ PC：260℃ PEI 1010：360℃ GF-PA/CF-PA：300℃ ABS：240℃ PEI 9085：360℃ CF-PC/PC-FR/PC-ABS：270℃ PETG：230℃ PPSU：360℃ CF-ABS：260℃ PLA：200℃ PPS：300℃...
-
Page 21: Start Printing
Print More Materials, All For Application 4.3 Start Printing Step 1 Step 2 Step 3 In the IEMAI slicing software Insert the SD card into the card slot Click “ ” ready to start on the right side of the device and... -
Page 22: Model Removal
Print More Materials, All For Application 4.4 Model Removal Step 1 Step 2 Step 3 Printed model on the build Use a scraper from the lower left Use a scraper from the lower platform corner of the model to insert right corner of the model to between the model and the insert between the model and... -
Page 23: Peek Material Printing Precautions
Print More Materials, All For Application 4.5 PEEK Material Printing Precautions Material/Parameter Print Temperature Platform Temperature Chamber Temperature peek Attention: 1. PEEK can only use high-temperature head printing 2.Pre-heat before printing, should first heat the thermostat chamber and hot bed, the print head should not be heated for a long-time, long-time heating is easy to form carbonization lead to print head clogging (clogging treatment see common problems and their solutions -... -
Page 24: Pc-Based Wifi Lan Control
Print More Materials, All For Application 4.6 PC-based WIFI LAN Control Step 1 Step 2 Step 3 ChiTu HB V1.10(1).zip Copy the generated file to the SD Installation of CHITU HB/PRO Enter the software interface card software Enter the name and password of and put it on the machine to the WIFI in the lower right corner print once... -
Page 25: Function Introduction
Print More Materials, All For Application 5. Function Introduction 5.1 Power Failure Recovery Step 1 Step 2 Step 3 If the machine suddenly powers Turn the power back on Select "Yes" in this screen off during the printing process Find the document that was And completes the power failure previously printing renewal... -
Page 26: Temperature Setting Of The Constant Temperature Chamber
Print More Materials, All For Application 5.3 Temperature Setting of The Constant Temperature Chamber 1. Enter the fan control interface and control the chamber fan to 100% 2. Enter the preheat interface to set the temperature, the highest set to 90 °C ± 5 °C Attention: Be sure to turn on the fan before heating up the chamber... -
Page 27: Maintenance And Care
Print More Materials, All For Application 6. Maintenance and Care This equipment belongs to the high-temperature equipment, interior use environment temperature is high ， do not replace regular parts by yourself to avoid machine failure. Do not replace regular parts by yourself to avoid machine failure. 6.1 Maintenance of Linear Guide and Ball Screw Ball screw and linear guide are the guarantee to keep secure operation, and the correct maintenance can effectively increase the service life of the machine. -
Page 28: Adjustment Of Belt Looseness
Print More Materials, All For Application 6.2 Adjustment of Belt Looseness The belt may loosen after a long period of time leading to a decline in print quality, so it is recommended that it be adjusted every six months. Step 1: Open the top cover, as shown on the top 14 screws and 3 screws on both sides to remove and take off the top cover Step 2: Check the belt tightness, finger lightly press... -
Page 29: Dust Removal From Electrical Box Fans
Print More Materials, All For Application 6.3 Dust Removal from Electrical Box Fans Step one: Check the dust condition of the dust cover and fan blades of the electrical box fan. Timely cleaning the dust of the cooling fan helps to improve the working environment of the motherboard and prevent the drive from overheating and out-of-step phenomenon. -
Page 30: Nozzle Maintenance
Print More Materials, All For Application 6.4 Nozzle Maintenance Nozzle cleaning: In the printing process there will be excess filament residue melted on the nozzle for the print item impact so need to be cleaned. Step 1: Heat up the nozzle (the last printing temperature shall prevail). - Page 31 Print More Materials, All For Application Nozzle replacement. Step 1: unscrew the 2 screws marked as shown, remove the print head outer frame Step 2: the nozzle will be warmed up (to the common printing temperature shall prevail) Step 3: the heating block using a duckbill pliers and use a 10mm socket to remove the nozzle counterclockwise rotation.
-
Page 32: Print Head Disassembly And Maintenance
Print More Materials, All For Application 6.5 Print Head Disassembly and Maintenance Attention: Please disassemble and install the print head with the power off The equipment is a dual Quick Detachable Print Head, if the print head needs to be replaced during use, the steps are as follows. -
Page 33: Steps To Disassemble The Nozzle
Print More Materials, All For Application 6.6 Steps to Disassemble The Nozzle Step 1 Step 2 Step 3 Unscrew the 2 screws as shown Loosen the top spring screw Removal of heating block completed... -
Page 34: Common Problems And Their Solutions
Print More Materials, All For Application 7. Common Problems and Their Solutions Only a few common problems are listed, for more questions please contact the technician directly. 7.1 Movement Problem Solution Problem 1: When extruding, the extrusion gear Increase the print head temperature or determine if shake. -
Page 35: Temperature
Print More Materials, All For Application 7.2 Temperature Problem Solution Problem one: click on the heating, the temperature Whether the print head is installed, or whether the does not change, a few seconds later prompted the wire is connected heating power is insufficient, check the heating head temperature rise Attention: temperature measurement careful of high temperature hot hands... -
Page 36: Clean Up Carbon Blockage
Print More Materials, All For Application 7.4 Clean Up Carbon Blockage Problem Solution Pull out the print head above the feed tube and remove the filament to reload the filament by cutting 1. Pause the print again after printing cannot be extruded off the expanded filament at the front. -
Page 37: Appendix
Print More Materials, All For Application 8. Appendix： Appendix A The difference between high and low temperature of the print head External distinction can be seen nozzle style, large square nut style for high-temperature nozzle, cone type for the common temperature nozzle。... - Page 38 Print More Materials, All For Application Appendix B How to use the platform glue stick 1.Before printing on the printing platform to apply solid glue evenly twice, as shown in the figure can be based on the size of the print model vertical and vertical coating of the corresponding area. 。...
- Page 39 Print More Materials, All For Application the automatic leveling compensation parameters to make the nozzle and platform closer to the distance As in the case of Figure 2. The skirt lines are connected and fused into one plane. This means that the distance between the nozzle and the platform is more appropriate, and such a skirt effectively increases the contact surface between the model and the platform,...