Table of Contents
Advertisement
4.4 Disassembly Model
Step 1
the finished model on the
printing platform
4.5 PEEK Material Printing Precautions
Materials/Parameters
peek
Note:
1. Peek can only be printed with high temperature head. Brim is recommended for attachment mode
2. When heating before printing, the constant temperature chamber and hot bed should be heated first. The
printing head should not be heated for a long time. It is easy to form carbonization and lead to the blockage of
the printing head
(see common problems and solutions for the blockage treatment - PEEK
3. PEEK should be baked at 120℃ for 5H before printing
4. The cooling fan is turned off when printing
Turn off the vacuum adsorption
switch
Printing Temp
Platform Temp
400
Step 2
Chamber Temp
100
90-120
- 27 -
Print More Materials, All For Application
Step 3
After taking down the platform,
carefully shovel the model from all
sides slowly
Z-axis support spacing
0.15-0.2
printing).
Advertisement
Table of Contents
