Table of Contents
Advertisement
Quick Links
Print More Materials, All For Application
HIGH-TEMPERATURE SERIES
3D PRINTER
MAGIC-HT-PRO
Operating Instructions
* Please read this manual carefully before starting to operate.
This device is a Class A product. Use in a general indoor environment
may cause radio interference and therefore requires the user to take
appropriate protective measures.
www.iemai3d.com
Advertisement
Table of Contents
Related Manuals for IEMAI MAGIC-HT-PRO
Summary of Contents for IEMAI MAGIC-HT-PRO
- Page 1 Print More Materials, All For Application HIGH-TEMPERATURE SERIES 3D PRINTER MAGIC-HT-PRO Operating Instructions * Please read this manual carefully before starting to operate. This device is a Class A product. Use in a general indoor environment may cause radio interference and therefore requires the user to take appropriate protective measures.
- Page 2 Print More Materials, All For Application The contents of this operating instructions may be updated periodically. Scan the QR code or visit the link below to get the latest version. www.iemai3d.com/index.php/download/...
-
Page 3: Table Of Contents
Print More Materials, All For Application Content 1. Overview ........................................2 1.1 Printer Overview..................................2 1.2 Precautions ....................................3 1.3 Safety ......................................4 2. Detailed Parameter ....................................5 2.1. Specification .....................................5 2.2 Device Layout................................... 6 2.3 Interactive interface ................................8 2.3.1 System Interface ................................9 2.3.2 Tool interface ................................10 2.3.3 Print interface ................................ -
Page 4: Overview
1. Overview 1.1 Printer Overview IEMAI High-Performance 3D printer MAGIC-HT-PRO is a 3D Printer based on the principle of Fused Filament Fabrication (FFF) technology ， has a print temperature up to 500 ° C ， Hot bed temperature of 200 °C，and a chamber temperature of 120 °C，Supports most of the polymer 3D printing materials on the market ，... -
Page 5: Precautions
Print More Materials, All For Application 1.2 Precautions First of all, thank you for choosing IEMAI 3D Printer！ This device is a Professional equipment, please read this manual carefully before starting to use, this manual contains important information about the installation, operation, maintenance, and common problems of the 3D printer, the company is not responsible for all losses caused by violation of the cautions and operating procedures given in this manual。... -
Page 6: Safety
Print More Materials, All For Application 1.3 Safety The device has a specialized motion structure, control system and electrical control parts, users need to pay careful attention to the safety label when using it to prevent burns, pinching, electric shock or other safety problems. The maximum temperature of the print head of this equipment can reach 500 °... -
Page 7: Detailed Parameter
Print More Materials, All For Application 2. Detailed Parameter 2.1. Specification... - Page 8 Print More Materials, All For Application...
-
Page 9: Device Layout
Print More Materials, All For Application 2.2 Device Layout... -
Page 10: Interactive Interface
Print More Materials, All For Application 2.3 Interactive Interface The interactive Interface of this device adopts a 5-inch Color Touch Screen (Resistive), please read the following instructions carefully before first use Logic diagram of interactive interface... -
Page 11: System Interface
Print More Materials, All For Application 2.3.1 System Interface Figure 1: Main interface Figure 2: System interface Figure 3: Info interface Click "Info" to go to Figure 3 This interface allows you to Click "System" to go to Figure 2 view the current coordinates of 2. -
Page 12: Tool Interface
Print More Materials, All For Application 2.3.2 Tool interface Figure 1: Main interface Figure 2: Tool Interface Figure 3：Manual Click "Tool" to go to Figure 2 Click "Manual" to go to Figure 3 Here can do the following Click "Preheat" to go to Figure 4 Select the moving unit of 0.1-10mm Click "Filament”... -
Page 13: Print Interface
Print More Materials, All For Application 2.3.3 Print Interface Figure 1: Main Interface Figure 2: File Interface Figure 3: Print Interface Click "Print" to go to Figure 2 Check Specify G-code file to print or 1. This interface is the main delete the file interface in print You can view thumbnails... -
Page 14: Device Usage
Print More Materials, All For Application 3.Device Usage 3.1 Unboxing for The First Time Step 1 Step 2 Step 3 Check if the packaging is The equipment is tightly packed Check The Door Glass, complete and protected Whether the Control Panel is Segmentation If there is a damage, please Please be patient in removing... -
Page 15: Check The Refrigerant
Print More Materials, All For Application 3.2 Check the Refrigerant 02 Check the Refrigerant Step 1 Step 2 Shown In the Figure During shutdown, the height of the normal refrigerant level The refrigerant can be viewed in should be located between the window behind the device 3.5-6.5 cm, i.e. -
Page 16: Hardware Check
Print More Materials, All For Application 3.3 Hardware Check Step 1 Step 2 Step 3 1.Connect the Power of Printer and 2.Under normal condition, all lights of 3.Manually make XYZ axis move Pedestal as shown in figure the device are lit as shown in figure through screen to observe if it moves normally as shown in figure Step 4... -
Page 17: Print Operation
Print More Materials, All For Application 4. Print Operation 4.1 Use of The Printing Platform Step 1 Step 2 Step 3 When you receive the device, As shown in the picture for the Find the platform glue in the the platform is installed, if you platform of the nine positioning kit, and after the platform cools want to disassemble it, please... -
Page 18: How To Calibrate
Print More Materials, All For Application 4.2 How to Calibrate Step 1 Step 2 Step 3 When printing the nozzle is found to be distant or close to the platform, but the overall flatness of the platform has not When printing the nozzle is changed, that is, the nozzle is found to be distant or close to equal to the height of the four... - Page 19 Print More Materials, All For Application Step 4 Step 5 Step 6 If the four corners of the When you can't push the Leveling by the nuts under the platform from the height of the nozzle manually four corners of the platform, nozzle has a large gap, you when the base height of the You can click “...
-
Page 20: Unload Filament
Print More Materials, All For Application 4.3 Load/Unload Filament Step 1 Step 2 Step 3 Print temperature according to Straighten the material Cut the material to the tip the material to be loaded Preheat Refer to Step 10 for the preheating temperature of different materials Step 4... - Page 21 Print More Materials, All For Application Step 7 Step 8 Step 9 When unloading materials Click to uninstall material After the material exits the “ ” gear Pull material in advance by hand and apply a certain E1 for the left nozzle, E2 for the Manually ripping it out amount of tension right nozzle...
-
Page 22: Start Printing
Print More Materials, All For Application 4.4 Start Printing Step 1 Step 2 Step 3 In the IEMAI slicing software Insert the SD card into the card Click “ ” ready to start Save the code to the SD card... -
Page 23: Function Introduction
Print More Materials, All For Application 5. Function Introduction 5.1 Power Failure Recovery Step 1 Step 2 Step 3 If the machine suddenly Turn the power back on Select "Yes" in this screen powers off during the printing Find the file you want to printing And completes the power process failure renewal... -
Page 24: Temperature Setting Of The Constant Temperature Chamber
Print More Materials, All For Application 5.3 Temperature Setting of The Constant Temperature Chamber Step 1 Step 2 Step 3 Schematic diagram of the Long press the temperature Through transposition keys, chamber temperature setting key to enter the setting increase/decrease keys controller interface Set target temperature... -
Page 25: Moisture Proof Cabinet Setting
Print More Materials, All For Application 5.4 Moisture Proof Cabinet Setting Step 1 Step 2 Step 3 Click Settings Use the increase/decrease keys Enter the settings screen Set the specified target humidity Target humidity value jump Recommended setting is a Pedestal humidity controller minimum of 10% RH diagram... -
Page 26: Pc-Based Wifi Lan Control
Print More Materials, All For Application 5.5 PC-based WIFI LAN control Step 1 Step 2 Step 3 ChiTu HB V1.10(1).zip Copy the generated file to the Installation of CHITU HB/PRO Enter the software interface SD card software Enter the name and password of and put it on the machine to the WIFI in the lower right corner print once... -
Page 27: Maintenance And Care
Print More Materials, All For Application Maintenance and Care This equipment belongs to the high-temperature equipment, interior use environment temperature is high，do not replace regular parts by yourself to avoid machine failure. Do not replace regular parts by yourself to avoid machine failure. 6.1 Maintenance of Linear Guide and Ball Screw Ball screw and linear guide are the guarantee to keep secure operation, and the correct maintenance can effectively increase the service life of the machine. -
Page 28: Adjustment Of Belt Looseness
Print More Materials, All For Application 6.2 Adjustment of Belt Looseness The belt may loosen after a long period of time leading to a decline in print quality, so it is recommended that it be adjusted every six months. Step 1: Open the top cover, as shown in the figure all the screws at the top and both sides of the screws out and take off the top cover. -
Page 29: Dust Removal From Electrical Box Fans
Print More Materials, All For Application 6.3 Dust Removal from Electrical Box Fans Step one. Check the dust condition of the dust cover and fan blades of the electrical box fan. Timely cleaning the dust of the cooling fan helps to improve the working environment of the motherboard and prevent the drive from overheating and out-of-step phenomenon. -
Page 30: Nozzle Maintenance
Print More Materials, All For Application 6.4 Nozzle Maintenance Nozzle cleaning: In the printing process there will be excess filament residue melted on the nozzle for the print item impact so need to be cleaned. Step 1: Heat up the nozzle (the last printing temperature shall prevail). -
Page 31: Equal Height Adjustment For Dual Print Heads
Print More Materials, All For Application 6.5 Equal Height Adjustment for Dual Print Heads Step 1 Step 2 At a fixed position 1.Push the print head to the far right 1.Move the Z-axis so that the print head is at the height 2.Touch the control switch to switch the print head and of an auxiliary block with the platform return... -
Page 32: Dual Print Head Auto-Switching Setting Method
Print More Materials, All For Application 6.6 Dual Print Head Auto-Switching Setting Method Step 1 Step 2 Create a new model with dual head switching on the After setting the corresponding model size and slicing software other parameters This model is only used for dual-head printing Enter the extrusion head 1 (left nozzle) parameter position This setting is not necessary for single-head printing... -
Page 33: Dual Print Head Nozzle Spacing Adjustment Method
Print More Materials, All For Application 6.7 Dual Print Head Nozzle Spacing Adjustment Method Step 1 Step 2 Step 3 Print a two-color miniature 1.Get printed as shown in the figure Open the slicing software Adding the paint tower 2.Take the left printhead as standard Adjust the parameters in the print head settings White left nozzle... -
Page 34: Print Head Disassembly And Maintenance
Print More Materials, All For Application 6.8 Print Head Disassembly and Maintenance Attention: Please disassemble and install the print head with the power off The equipment is a dual Quick Detachable Print Head, if the print head needs to be replaced during use, the steps are as follows. -
Page 35: Coolant Addition
Print More Materials, All For Application 6.9 Coolant Addition Step 1 Step 2 Unscrew the six screws as shown to remove the side of Unscrew the nut by turning counterclockwise the rear cover plate Step 3 Step 4 Using a funnel for coolant addition Make the coolant level is located between 3.5-6.5cm that is, between two red lines, screw on screw cap. -
Page 36: Use And Maintenance Of Desiccant
Print More Materials, All For Application 6.10 Use And Maintenance Of Desiccant Tear off the yellow paper on the upper surface before use, and the moisture-absorbing agent absorbs the moisture in the consumables box through the small hole above. When the desiccant appears orange, it means the desiccant is relatively dry and gradually changes to green after absorbing water. -
Page 37: Common Problems And Their Solutions
Print More Materials, All For Application 7. Common Problems and Their Solutions A few common problems are listed, for more questions please contact the technician directly. 7.1 Movement Problem Solution Problem 1: When extruding, the extrusion gear shake. Increase the print head temperature or determine if the head is clogged or needs to be reloaded with material. -
Page 38: Print
Print More Materials, All For Application 7.3 Print Problem Solution Problem 1: Prompt #1 or #2 no material, cannot print Add material at the filament-warning test properly Problem 2: The print appears to be detached from the After determining that the platform is able to print that bottom and is carried away material, adjust the platform and nozzle gap when the zero point is small (see Printing - Installing the Build... -
Page 39: Clean Up Carbon Blockage
Print More Materials, All For Application 7.4 Clean Up Carbon Blockage Problem Solution Problem 1: Print again after a pause in printing cannot Pull out the feed tube above the print head be extruded Remove the filaments and cut off the expanded filaments s at the front end and reload them. -
Page 40: Appendix
Print More Materials, All For Application 8. Appendix： Appendix A The difference between high and low temperature of the print head External differentiation can be seen nozzle style, hexagonal nut style for high-temperature nozzles, into a cone type for the general temperature nozzle. - Page 41 Print More Materials, All For Application Appendix B How to use the platform glue stick 1.Before printing on the printing platform to apply solid glue evenly twice, as shown in the figure can be based on the size of the print model vertical and vertical coating of the corresponding area. Attention: The temperature of the carbon fiber board when applied cannot exceed 50 ℃...
- Page 42 Print More Materials, All For Application As in the case of Figure 1. The skirt line is loose and independent, and separated by one root. This means that the nozzle is a little far from the platform, you can increase the automatic leveling compensation parameters to make the nozzle and platform closer to the distance...