Table of Contents
Advertisement
4. Print Operation
4.1 Installation of The Printing Platform and Auto-Calibration
Step 1
Installation of glass platform
1.
Step 2
The four corners of the
1.
platform are fixed with sheet
metal clips
— 19 —
Print More Materials, All For Application
Step 3
1.
Find the leveling aid sensor (as
shown in the picture)
2.
and connect to the interface
reserved on the print head
(connection does not
distinguish between positive
and negative)
3.
(connection does not
distinguish between positive
and negative)
4.
Install the foam onto the
nozzle as shown
5.
Wrap the nozzle as far as
possible and parallel to the
bottom
Advertisement
Table of Contents
