1. Manuals
  2. Brands
  3. IEMAI Manuals
  4. 3D Printers
  5. MAGIC-HT-L
  6. Operating instructions manual

IEMAI MAGIC-HT-L Operating Instructions Manual

High-temperature series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Print More Materials, All For Application
HIGH-TEMPERATURE SERIES
3D PRINTER
MAGIC-HT-L
Operating Instructions
* Please read this manual carefully before starting to operate.
This device is a Class A product. Use in a general indoor environment
may cause radio interference and therefore requires the user to take
appropriate protective measures.
www.iemai3d.com

Advertisement

Table of Contents
loading

Related Manuals for IEMAI MAGIC-HT-L

Summary of Contents for IEMAI MAGIC-HT-L

  • Page 1 Print More Materials, All For Application HIGH-TEMPERATURE SERIES 3D PRINTER MAGIC-HT-L Operating Instructions * Please read this manual carefully before starting to operate. This device is a Class A product. Use in a general indoor environment may cause radio interference and therefore requires the user to take appropriate protective measures.
  • Page 2 Print More Materials, All For Application The contents of this operating instructions may be updated periodically. Scan the QR code or visit the link below to get the latest version. www.iemai3d.com/index.php/download/...

  • Page 3: Table Of Contents

    Print More Materials, All For Application Content 1．Overview ..................................1 1.1 Machine Overview ..............................1 1.2 Precautions ................................2 1.3 Safety ................................... 3 2. Detailed Parameter ..............................4 2.1. Specification ............................... 4 2.2 Device Layout ..............................6 2.3 Interactive Interface ............................8 3.Device Usage ................................12 3.1 Unboxing for The First Time ..........................12 3.2 Hardware Check ...............................

  • Page 4: 1．Overview

    1．Overview 1.1 Machine Overview IEMAI high-performance 3D printer MAGIC-HT-L is a 3D printing device based on the principle of fused filament deposition (FFF) technology, with a printing temperature of up to 450°C, a hot bed temperature of 150 °C, and a chamber temperature of 90 °C. It supports most polymer 3D printing...

  • Page 5: Precautions

    Print More Materials, All For Application 1.2 Precautions First of all, thank you for choosing IEMAI 3D Printer！ This device is a Professional equipment, please read this manual carefully before starting to use, this manual contains important information about the installation, operation, maintenance, and common problems of the 3D printer, the company is not responsible for all losses caused by violation of the cautions and operating procedures given in this manual。...

  • Page 6: Safety

    Print More Materials, All For Application 1.3 Safety The device has a specialized motion structure, control system and electrical control parts, users need to pay careful attention to the safety label when using it to prevent burns, pinching, electric shock, or other safety problems. The maximum temperature of the print head of this equipment can reach 450°C, its heating is strictly prohibited to touch The maximum temperature of the printing platform of this equipment can reach...

  • Page 7: Detailed Parameter

    Print More Materials, All For Application 2. Detailed Parameter 2.1. Specification...
  • Page 8 Print More Materials, All For Application...

  • Page 9: Device Layout

    Print More Materials, All For Application 2.2 Device Layout Control Panel Switch Left Chamber Right Chamber Temperature Temperature Controller Controller Door Handle Left Chamber Left Filament Box...
  • Page 10 Print More Materials, All For Application Top Window SD Card USB Port Right Chamber Right Filament Motherboard Window Power Input Switch...

  • Page 11: Interactive Interface

    Print More Materials, All For Application 2.3 Interactive Interface The interactive Interface of this device adopts a 5-inch Color Touch Screen (Resistive), please read the following instructions carefully before first use Logic diagram of interactive interface...
  • Page 12 Print More Materials, All For Application 2.3.1 System Interface Figure 1: Main interface Figure 2: System interface Figure 3: Info interface Click "Info" to go to Figure 3 This interface allows you to Click "System" to go to Figure 2 view the current coordinates of 2.
  • Page 13 Print More Materials, All For Application 2.3.2 Tool interface Figure 1: Main interface Figure 2: Tool Interface Figure 3：Manual Click "Tool" to go to Figure 2 Click "Manual" to go to Figure 3 Here can do the following Click "Preheat" to go to Figure 4 Select the moving unit of 0.1-10mm Click "Filament”...
  • Page 14 Print More Materials, All For Application 2.3.3 Print Interface Figure 1: Main Interface Figure 2: File Interface Figure 3: Print Interface Click "Print" to go to Figure 2 Check Specify G-code file to print or 1. This interface is the main delete the file interface in print You can view thumbnails...

  • Page 15: Device Usage

    Print More Materials, All For Application 3.Device Usage 3.1 Unboxing for The First Time Step 1 Step 2 Step 3 Check if the packaging is The equipment is tightly packed Check The Door Glass, complete and protected Whether the Control Panel is Segmentation If there is a damage, please Please be patient in removing...

  • Page 16: Hardware Check

    Print More Materials, All For Application 3.2 Hardware Check Step 1 Step 2 Step 3 As shown in the diagram Under normal condition, all lights of the device are lit as Connect the device power to shown in the figure the bench power Click Manual Set the unit to 10mm...

  • Page 17: Print Operation

    Print More Materials, All For Application 4. Print Operation 4.1 Use of The Printing Platform Step 1 Step 2 Step 3 1.The picture shows 4 fixing clips for 1.If the first time to return to zero 1.Manually control the Z axis to fixing the building platform make the platform rise, when the 2.The nozzle is found to be close to...

  • Page 18: How To Calibrate

    Print More Materials, All For Application 4.2 How to Calibrate Step 1 Step 2 Step 3 After completing the basic Click on the arrow The system automatically moves leveling in step 4.1 to the last point. You need to click Leveling After stopping the movement Use the stopper to adjust the distance between the platform...

  • Page 19: Unload Filament

    Print More Materials, All For Application 4.3 Unload Filament Step 1 Step 2 Step 3 Print temperature according to Straighten the material Load the material through the the material to be loaded break test port Cut the material to the tip Preheat Manually feed it to the gears Refer to...
  • Page 20 Print More Materials, All For Application Step 7 Step 8 Click uninstall material After the material exits the gear “ ” Manually ripping it out E1 for the left nozzle, E2 for the And fix the threads right nozzle Do a good moisture preservation Step 9: Recommended preheating nozzle temperature for commonly used materials...

  • Page 21: Start Printing

    Print More Materials, All For Application 4.4 Start Printing Step 1 Step 2 Step 3 In the IEMAI slicing software Insert the SD card into the card Click “ ” ready to start Save the code to the SD card...

  • Page 22: Function Introduction

    Print More Materials, All For Application 5. Function Introduction 5.1 Power Failure Recovery Step 1 Step 2 Step 3 If the machine suddenly Turn the power back on Select "Yes" in this screen powers off during the printing Find the file you want to printing And completes the power process failure renewal...

  • Page 23: Temperature Setting Of The Constant Temperature Chamber

    Print More Materials, All For Application 5.3 Temperature Setting of The Constant Temperature Chamber Step 1 Step 2 Step 3 Schematic diagram Long press the temperature Press and hold the set button chamber temperature controller setting key to enter the setting unit this position number begins interface to jump...

  • Page 24: Model Removal

    Print More Materials, All For Application 5.3 Model Removal Step 1 Step 2 Step 3 Printed model on the build Use a scraper from the lower left Use a scraper from the lower platform corner of the model to insert right corner of the model to between the model and the insert between the model and...

  • Page 25: Peek Material Printing Precautions

    Print More Materials, All For Application 5.5 PEEK Material Printing Precautions Material/Parameter Print Temperature Platform Temperature Chamber Temperature peek Attention: 1. PEEK can only use high-temperature head printing 2.Pre-heat before printing, should first heat the thermostat chamber and hot bed, the print head should not be heated for a long-time, long-time heating is easy to form carbonization lead to print head clogging (clogging treatment see common problems...

  • Page 26: Pc-Based Wifi Lan Control

    Print More Materials, All For Application 5.6 PC-based WIFI LAN Control Step 1 Step 2 Step 3 ChiTu HB V1.10(1).zip Copy the generated file to the Installation of CHITU HB/PRO Enter the software interface SD card software Enter the name and password of and put it on the machine to the WIFI in the lower right corner print once...

  • Page 27: Maintenance And Care

    Print More Materials, All For Application 6. Maintenance and Care This equipment belongs to the high-temperature equipment, interior use environment temperature is high ， do not replace regular parts by yourself to avoid machine failure. Do not replace regular parts by yourself to avoid machine failure. 6.1 Maintenance of Linear Guide and Ball Screw Ball screw and linear guide are the guarantee to keep secure operation, and the correct maintenance can effectively increase the service life of the machine.

  • Page 28: Adjustment Of Belt Looseness

    Print More Materials, All For Application 6.2 Adjustment of Belt Looseness The belt may loosen after a long period of time leading to a decline in print quality, so it is recommended that it be adjusted every six months. First step: open the top cover, as shown on the top 16 screws and 3 screws on both sides to remove and take off the top cover Step 2: Check the belt tightness, finger lightly...

  • Page 29: Dust Removal From Electrical Box Fans

    Print More Materials, All For Application 6.3 Dust Removal from Electrical Box Fans Step one: Check the dust condition of the dust cover and fan blades of the electrical box fan. Timely cleaning the dust of the cooling fan helps to improve the working environment of the motherboard and prevent the drive from overheating and out-of-step phenomenon.

  • Page 30: Nozzle Maintenance

    Print More Materials, All For Application 6.4 Nozzle Maintenance Nozzle cleaning: In the printing process there will be excess filament residue melted on the nozzle for the print item impact so need to be cleaned. Step 1: Heat up the nozzle (the last printing temperature shall prevail).
  • Page 31 Print More Materials, All For Application Nozzle replacement： Normal temperature nozzles need to be replaced as follows, high temperature nozzles refer to peek use blockage treatment Step 1: remove the print head with reference to the disassembly and maintenance of the print head. step two: the heating block using a duckbill pliers clamp and use a 10mm socket to turn counterclockwise to remove the nozzle.

  • Page 32: Equal Height Adjustment For Dual Print Heads

    Print More Materials, All For Application 6.5 Equal Height Adjustment for Dual Print Heads Sep 1 Step 2 Use a piece of gauge in a fixed position to make the Push the nozzle 2 (right) to the left just to stay in the nozzle 1 (left) and the platform spacing is just position of the previous test left nozzle using the enough for it to pass...

  • Page 33: Dual Print Head Nozzle Spacing Adjustment Method

    Print More Materials, All For Application 6.6 Dual Print Head Nozzle Spacing Adjustment Method Step 1 Step 2 Step 3 Print a two-color miniature Get printed as shown in the Open the slicing software figure Adding the paint tower Adjust the parameters in the Take the left printhead as print head settings White left nozzle...

  • Page 34: Print Head Disassembly And Maintenance

    Print More Materials, All For Application 6.7 Print Head Disassembly and Maintenance Attention: Please disassemble and install the print head with the power off The equipment is a dual Quick Detachable Print Head, if the print head needs to be replaced during use, the steps are as follows.

  • Page 35: Steps To Disassemble The Nozzle

    Print More Materials, All For Application 6.8 Steps to Disassemble The Nozzle Step 1 Step 2 Unscrew the 2 screws as shown Loosen the top spring screw Step 3 Step 4 Loosen the top spring screw Disassembly as shown in the figure Step 5 Step 6 Loosen the screws as shown...

  • Page 36: Common Problems And Their Solutions

    Print More Materials, All For Application 7. Common Problems and Their Solutions Only a few common problems are listed, for more questions please contact the technician directly. 7.1 Movement Problem Solution Problem 1: When extruding, the extrusion gear Increase the print head temperature or determine shake.

  • Page 37: Print

    Print More Materials, All For Application 7.3 Print Problem Solution Problem 1: Prompt #1 or #2 no material, cannot Add material at the filament-warning test print properly Problem 2: The print appears to be detached After determining that the platform is able to from the bottom and is carried away print that material, adjust the platform and nozzle gap when the zero point is small...
  • Page 38 Print More Materials, All For Application material to expand and jam the filaments. Treatment I. Use nozzle corresponding size of the needle to unclog nozzle and extrude again will be internal Treatment II: Step 1: Refer to the print head disassembly and maintenance, after removing the print head Step 2: Use a 2mm drill bit to drill out the material inside the throat and nozzle, turn into a depth of...

  • Page 39: Appendix

    Print More Materials, All For Application 8. Appendix： Appendix A The difference between high and low temperature of the print head External differentiation can be seen nozzle style, hexagonal nut style for high-temperature nozzles, into a cone type for the general temperature nozzle.
  • Page 40 Print More Materials, All For Application Appendix B How to use the platform glue stick 1.Before printing on the printing platform to apply solid glue evenly twice, as shown in the figure can be based on the size of the print model vertical and vertical coating of the corresponding area. Attention: The temperature of the carbon fiber board when applied cannot exceed 50 ℃...
  • Page 41 Print More Materials, All For Application As in the case of Figure 1. The skirt line is loose and independent, and separated by one root. This means that the nozzle is a little far from the platform, you can increase the automatic leveling compensation parameters to make the nozzle and platform closer to the distance...

Table of Contents