Table of Contents
Advertisement
Nozzle replacement：
Normal temperature nozzles need to be
replaced as follows, high temperature nozzles
refer to peek use blockage treatment
Step 1: remove the print head with
reference to the disassembly and maintenance
of the print head.
step two: the heating block using a duckbill
pliers clamp and use a 10mm socket to turn
counterclockwise to remove the nozzle.
(If you cannot turn the heating to 150 ℃
and then remove)
Step 3: take out the new nozzle using raw
material tape clockwise around the threaded
part of the nozzle 7 turns and will be pressed
out of the thread.
Step 4: use duckbill pliers, sleeve to
re-install the nozzle into the print head.
Nozzle
replacement
readjustment of nozzle and print platform pitch.
((For details, please refer to Printing -
Installing Print Platforms and Leveling)
requires
timely
28
Print More Materials, All For Application
Advertisement
Table of Contents
