Product Description; Intended Use - Otto Bock 16X4 Instructions For Use Manual

2 Product description

2.1 Available sizes
The 16X4 arm bar is available in one size.
2.2 Components/design
Scope of delivery (see fig. 1)
Item Quantity
[Piece
(s)]
1
2
3
4
5
6
7
2.3 Design
The orthotic joint is equipped with a latch lock that engages in 20° incre­
ments in the extension direction. The latch lock can be unlocked at maximum
flexion of the elbow joint, at approximately 135°.

3 Intended use

3.1 Indications for use
The product is intended exclusively for use in pairs for prosthetic and
orthotic fittings of the upper limbs on one patient.
3.2 Indications
• Transradial to transcarpal amputation level
• Orthopaedic diseases of the upper limbs
• Partial or total paralysis of the arm muscles
Indications must be determined by the physician.
3.3 Lifetime
The product is designed for a lifetime of 3 years when used as intended and
assembled professionally.
8
1 Upper joint bar section
1 Lock latch
1 Cover plate
1 Lock ring
1 Lower joint bar section
1 Joint bolt
1 Bolt for lock latch
Designation