Using The Projector; Basic Image Adjustment; Adjusting The Projector - InFocus LP210 User Manual

USING THE PROJECTOR

This section describes how to use and make adjustments to the
projector. It also provides a reference to thekeypad buttons and
the options available from the on-screen menus.

Basic Image Adjustment

1 Make sure you have powered up your equipment in the right
order (page 11).
2 If the image doesn't display completely, adjust the height of
the projector (page 14) or center the image by adjusting its
horizontal or vertical position (page 25).
3 If the image is out of focus, rotate the lens to focus it (page 13).
4 If the image appears to shimmer or if it has blurry vertical
bars after you have adjusted the focus, turn
(page 24) off and then back on to reset the automatic sync and
tracking. If that doesn't clear up the image, adjust the sync
(page 24) and/or the tracking (page 25) manually.
5 If the colors don't look right, adjust the brightness (page 16).

Adjusting the Projector

To focus the image, rotate the projection lens until the image is
clear. Rotate the lens clockwise for a longer focusing distance;
counterclockwise for a shorter focusing distance.
If the projected image seems wider at the bottom or at the top,
rotate the keystone adjustment dial on the back of the projector
until the image is correct (Figure 9).
Auto Image
13