InFocus LP210 User Manual page 5

Ventilation and Overheating
Openings in the projector case provide ventilation to protect it
from overheating. Keep loose papers and other objects well away
from the bottom, top and side grills. Do not place the projector on
top of or close to a computer or other heat-producing equipment.
Liquid Spills
Do not set drinks on top of the projector. Spilled liquids can flow
inside and cause damage.
Do Not Disassemble
All service must be performed by an authorized In Focus service
center. The only user-serviceable parts in the projector are the
projection lamp, which you can replace by opening the lamp
cover on the bottom of the projector (see page 31) and the fuse.
Do not open any other part of the projector. If your projector
needs repair, call In Focus Technical Support as described on
page 3. Before you call Technical Support, you may want to refer
to "Troubleshooting" on page 36 to see if you can resolve the
problem yourself.
Don't Set the Projector on its Lens
To protect the lens when you are transporting the projector, adjust
the lens so it is fully retracted (turn it clockwise) before you pack
it.
Place the projector in its carrying case with the lens facing
upwards. You may damage the projector if you set it on its lens.
NOTE: If you open the projector
case, you will void the warranty.
v