Turning Off The Projector - InFocus LP210 User Manual

S e t t i n g
NOTE: When you disconnect the
projector after you have switched
it off, always remove the power
cord from the electrical outlet first,
then remove it from the projector.
12
u p t h e

Turning Off the Projector

If you want to turn off the projector for a short period of time,
press the
standby
fifteen minutes, but keeps the projector running. After 15 min-
utes, the lamp goes out (the projector keeps running). To exit
standby mode, press the
seconds for the projection lamp to reach full power and project
the image again.)
To completely power off the projector, press the "O" side of the
power switch. If you want to turn the projector back on immedi-
ately, you must allow about 45 seconds for the lamp to cool. The
lamp won't light if it's too hot.
P r o j e c t
button on the keypad. This blanks the screen for
button again. (It takes several
standby
o r