InFocus LP210 User Manual page 14

S e t t i n g
CAUTION: Your video player
may also have a "Video Out" port
for a coaxial cable connection.
DO NOT use this to connect to the
projector.
10
u p t h e
F 7
IGURE
Connecting the projector to a video player using an S-video cable and the audio con-
nectors on the standard A/V cable
4 Plug the A/V cable's white connector into the left "audio out"
port on your video player. Plug the cable's red connector into
the right "audio out" port on the video player (Figure 6 and
Figure 7).
If you're using an S-video cable, the yellow connectors on
•
the A/V cable remain unused (Figure 7).
5 Plug the A/V cable's other white and red connectors to the
left and right "audio in" ports on the projector.
The projector is compatible with the three major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM.
It automatically adjusts to optimize its performance for the
incoming video. The input signals for SECAM, PAL-M, and
PAL-N video cannot be automatically detected, therefore they
must be chosen manually; see "Video Standard" on page 26.
P r o j e c t
S-video cable
A/V cable
o r