InFocus LP210 User Manual page 37

M a i n t e
CAUTION: A surge-protected
power strip is recommended if
power surges are common in your
34
n a n c e &
4 Remove the blown fuse from the fuse holder (Figure 26).
F 26
IGURE
Removing the fuse from the fuse holder
5 Push the spare fuse into the holder until it is securely seated.
6 Place the fuse holder back in position (Figure 27).
7 Plug the power cord back in.
8 Press the "|" side of the power switch to turn the projector
back on.
area.
F 27
IGURE
Replacing the fuse holder
T r o u b l e s h o o t i n g