Table of Contents
Advertisement
7.4 REMOTE EFFECTIVE RANGE
You can locate the infrared (IR) remote control sensors on the top of the projector next to the keypad and on the front to the left of
the lens. Hold the remote control at an angle within 60 degrees perpendicular of the projector's IR remote control sensor. Ensure
that there are no obstacles between the remote control and the IR sensor on the projector.
The distance between the remote control and the IR sensor should be less than 12 meters (39.4 feet). If the remote control is less
than 20cm (8 inches) from the IR sensor, the remote control might become ineffective. The effective range is approximately 5
meters (16.4 feet) when reflecting the IR beam using a screen. The range will depend on the screen's surface and reflectivity.
Direct sunlight or florescent lamps can reduce the range of the remote control.
7.5 TURNING THE PROJECTOR ON
1. Securely connect the mains cable to the projector and to a mains outlet. When connected, the Power LED will turn red.
Make sure that people cannot step on any electrical cables or trip over the cables. Do not put objects on the cables.
2. Connect a signal/source cable to a source device and the projector.
3. Remove the lens cap.
4. Press the Power button
The InFocus start up screen will appear after approximately 10 seconds. The Power LED will flash blue and then steady
blue.
7.6 SELECTING AN INPUT SOURCE
Your projector has a Direct Power On setting. This setting will automatically turn on the projector when a power source is
connected. To turn on this feature, press the Menu button on the remote control or keypad, navigate to Settings > Power Settings
> Direct Power On, and select On.
1. Turn on the connected source, such as a computer or DVD player, or connect a digital media player, such as a Google
Chromecast.
2. Press the Source button on the keypad or remote control to select the input source.
3. Play the content on the source device.
on the keypad or remote control.
32
Advertisement
Table of Contents
