To raise the projector:
1 Raise the front of the projector off the table by lifting up on the
handle (Figure 11).
2 Pull out the elevator foot (Figure 11).
3 If necessary, use the leveling knob (Figure 10) to adjust the
angle of the projected image.
To lower the projector:
1 Hold the projector's handle.
2 Pull the foot away from the projector, then push it back to its
collapsed position.
3 If necessary, use the leveling knob (Figure 10) to readjust the
angle of the projected image.
F
Adjusting the height of the projector
11
IGURE
CAUTION: Always hold the pro-
jector's handle when you adjust the
height.
15