Otto Bock Defender Instructions For Use Manual page 11

Größen [cm]
Mobilitätsgrad
1 Product description
INFORMATION
Date of last update: 2021-05-25
► Please read this document carefully before using the product and
observe the safety notices.
► Instruct the user in the safe use of the product.
► Please contact the manufacturer if you have questions about the
product or in case of problems.
► Report each serious incident related to the product to the manufacturer
and to the relevant authority in your country. This is particularly import­
ant when there is a decline in the health state.
► Please keep this document for your records.
1.1 Construction and Function
This document applies to the following products: FS3 Defender
The prosthetic foot has carbon spring elements. The heel stiffness can be
increased with a heel wedge.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compon­
ents based upon weight and mobility grades identifiable by our MOBIS clas­
sification information and which have appropriate modular connectors.
FS3 Defender
16 17 18 19 20
2, 3, 4
21
English
11