I Programming A Memory Channel-2 - Icom IC-R10 Instruction Manual

I Programming a memory channel — 2
This is the simplest method to memo-
rize the received frequency along with
its receive mode and other information.
1. Setting receive
conditions
q Select VFO mode (p. 11).
w Set the frequency and receive
mode (p. 12).
2. BANK and memory
channel setting
While
[FUNC],
[ MW].
(V/M)
3. BANK and memory
channel setting
q While pushing [FUNC], rotate
[DIAL] to select the BANK you
want to program into.
w Rotate [DIAL] to select the mem-
ory channel you want to program.
pushing
1
push
4. Programming
While
[
(V/M)
data.
• When programming is successfully
completed, 3 beeps sound and VFO
mode is automatically selected.
1 2
MEMORY MODE
pushing [FUNC], push
MW] for 2 sec. to program the
4
26