I Keypad - Icom IC-R10 Instruction Manual

1
PANEL DESCRIPTION

I Keypad

KEY
Push for 1 sec. to toggle power ON and OFF. Opening mes-
POWER
sage appears for 1 sec. after power ON
Push and hold this switch to force the squelch open
MONI
TS
Selects a receive mode: FM, AM, USB, LSB, CW or WFM
MODE
(p. 12).
SET
Clears numeric key input
CLR
Stops scanning
MW
Toggles VFO or MEMORY mode
V/M
DIAL SEL
Starts/stops scanning
SCAN
SEARCH
Selects EASY mode
EASY
LOCK
Selects memory edit mode. (except when in VFO mode
EDIT
51).
In VFO mode: enters the selected receive frequency
NB/ANL
In MEMORY mode: enters the selected memory channel
ENT
the memory search function (p. 68).
5
PRIMARY FUNCTION
(p. 10).
(p. 14).
(p. 39).
(pgs. 11, 23).
(p. 39).
(p. 50).
SECONDARY FUNCTION (while pushing [FUNC])
Not available
(p. 64). Not available
Selects tuning step set mode
(p. 59).
Selects SET mode
In VFO mode: writes to a memory channel
ORY mode: transfers memory contents to VFO mode
or copies to another channel
In VFO mode: selects a dial select step
Selects memory channel name search mode
; p.
Locks all switches and controls electronically except [VOL],
[SQL], [FUNC], [POWER] and [MONI]
(p. 14).
Activates the noise blanker while in SSB and CW mode, or
by
the ANL function while in AM mode
(p. 13).
(p. 29).
In MEM-
(p. 33)
(p. 33).
(p. 16).
(p. 67).
(p. 64).
(p. 65).