Icom IC-R10 Instruction Manual page 33

3. Programming details — cont.
3 Push [EDIT], then rotate [DIAL] to select receive mode.
4 Push [EDIT], then rotate [DIAL] to select the skip scan
condition.
t Push [EDIT], then rotate [DIAL] to select the attenuator
condition.
y Push [EDIT], then rotate [DIAL]
or enter alphanumeric charac-
ters to program a BANK name.
• When you enter channel names
with [DIAL] or a character as-
signed to the same key, push
[ENT] before you enter the next
character to change the digit (see
page 72 for alphanumeric key as-
signments).
6
3. Programming details — cont.
u Push [EDIT], to display your programmed frequency for
confirmation. When the correct frequency is displayed,
push [EDIT] for 2 sec. to return to VFO mode.
When you want to return to VFO mode immediately, push
[EDIT] for 2 sec. at any time.
4
MEMORY MODE
28