I Auto Mode And Ts Function - Icom IC-R10 Instruction Manual

10
OTHER FUNCTIONS

I Auto mode and TS function

The auto receive mode select and auto tuning step select
functions are optionally available. This function can be set
up and modified by programming from a computer using the
optional CS-R10
CLONING SOFTWARE
pre-programmed.
Set auto mode
Push [MODE] one or more times, in VFO mode, until
" " appears, then push [CLR] to return to VFO
mode.
69
. Some versions may be
MODE
VFO
FM
The auto tuning step and receive mode select functions can
be set up by dividing the operatable frequency range into up
to 15 bands. For details contact your nearest dealer or local
distributor.
Set auto TS
While pushing [FUNC], push [
then rotate [DIAL] to select "
[DIAL]
TS] in VFO mode,
(MODE)
"
VFO
FM