Icom IC-R10 Instruction Manual page 37

3. Programming details
— cont.
t Push [EDIT] to change the re-
ceive mode item.
y Rotate [DIAL] to select AM mode,
then push [EDIT] to change the
item.
VFO
FM
[DIAL]
u Rotate [DIAL] to select the OFF
position for SKIP setting, then
push [EDIT].
VFO
FM
[DIAL]
3. Programming details
— cont.
i Rotate [DIAL] to select the OFF
position for attenuator setting,
then push [EDIT].
VFO
FM
[DIAL]
o Rotate [DIAL] until the character
"A" appears, then push [ENT] or
push [2] once to enter "A".
VFO
FM
[DIAL]
ENT
or
2
!0 Rotate [DIAL ]then push [ENT] to
enter the characters for BANK
names or push numeral keys (see
page 72 for alphanumeric key as-
signments).
MEMORY MODE
3. Programming details
— cont.
!1 The display shows the pro-
grammed frequency for confirma-
tion; push and hold [EDIT] for 2
sec. if the frequency is correct.
• After pushing and holding [EDIT],
VFO mode is automatically selected.
EDIT
VFO
AM
Push
for
2 sec.
4
32