I Call Channel Programming; I Lock Functions - Icom IC-M422 Instruction Manual

12
COMMANDMIC II™ HM-157

I Call channel programming

q While
pushing
[CH/WX•
U/I/C
DW
to select the desired channel
group (USA, INT, CAN) to be pro-
grammed.
w Push [16•
] for 1 sec. to select call
9
channel of the selected channel
group.
• "CALL" and call channel number ap-
pear.
e Push [16•
] again for 3 sec. (until
9
a long beep changes to 2 short
beeps) to enter the call channel
programming condition.
• The channel number and channel
group to be programmed blinks.
r Push [Y Y ] or [Z Z ] to select the de-
sired channel.
t Push [16•
] to program the dis-
9
played channel as the call chan-
nel.
• The channel number stops blinking.
• Push [CH/WX•
DW
46
[H/L], push
] several times
U/I/C] to cancel.

I Lock functions

The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
• All keys, switches and controllers on the transceiver are functional.
D D Activating the Lock function
➥ While
pushing [H/L],
[SQL• ] to turn the Lock
L
MONI
function ON or OFF.
• " T " appears.
• Only [PWR], [PTT],
[SQL• ], [VOL•
L DIM PA/RX
MONI
+[Y Y ] or [Z Z ] and [SQL•
MONI
or [Z Z ] are functional.
D D Activating the All Key Lock function
➥ While pushing [H/L], turn the
power ON by pushing [PWR] to
turn the All Key Lock function ON
or OFF.
• " T " blinks.
• Only [PWR] and [PTT] are func-
tional.
push
[H/L],
]
]+[Y Y ]
L
Appears
Blinks