Dsc Operation; I Mmsi Code Programming; I Mmsi Code Check - Icom IC-M422 Instruction Manual

I MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This function is not available when the MMSI code has
been programmed by the dealer. This code programming
can be performed only twice.
q Turn power OFF.
w While pushing [DSC•
POS
code programming condition.
e After the display appears, release [DSC•
• A cursor starts blinking.
r Enter the specified MMSI code by pushing [Y] or [Z].
• Push [CH/WX• ] or [16•
DUAL
backward, respectively.
t Input 9-digit code, then push [DSC•
• Returns to the normal operation.
], turn power ON to enter MMSI
].
POS
] to move the cursor forward or
9
] to set the code.
POS

DSC OPERATION

I MMSI code check

The 9-digit MMSI (DSC self ID) code can be checked.
q Push [DSC•
] to enter the DSC menu.
POS
w Push [Y] or [Z] to select "
e Check the 9-digit MMSI (DSC self ID) code.
• The MMSI code is displayed and scrolls at the channel comment
indicator.
r Push [DSC•
] to exit the DSC menu.
POS
6
" and push [DSC• ].
POS
MMSI (DSC self ID) code scrolls
5
6
13