Table of Contents
Advertisement
12
COMMANDMIC II™ HM-157
I Intercom operation
q Push [LO/DX•
IC
to activate the Intercom function.
w Push and hold [PTT] to talk.
• "
" appears at the channel
comment indicator.
e Release [PTT] to listen.
• "
" appears at the channel
comment indicator when the trans-
ceiver is in talking mode.
r Push [LO/DX•
IC
• Pushing [16•
] also cancels the Intercom function.
9
For your reference:
In case the Intercom mode is selected with the transceiver
while the microphone power is OFF, the microphone power is
automatically turned ON and the Intercom mode is selected.
D D Intercom beep function
➥ Push and hold [LO/DX•
• Emits the Intercom beep while holding.
50
] for 1 sec.
SCR
] to cancel the Intercom function.
SCR
] for more than 1 sec.
SCR
IC
I Public Address function
q While pushing [H/L], push
[VOL•
] to enter the
PA/RX
DIM
Public Address mode.
w Push and hold [PTT] to talk.
• "
" appears at the channel
comment indicator.
e Release [PTT] to listen.
• "
" appears at the channel
comment indicator when the transceiver is in talking mode.
• To adjust the audio output level, push [Y] or [Z].
r To cancel the Public Address mode, repeat step q.
• Pushing [16•
] also cancels the Intercom function.
9
While in the Public Address mode, the transceiver func-
tions (transmit and receive) are interrupted. If the trans-
ceiver is in transmit condition, the Public Address function
is not available.
I RX Speaker function
q Push [VOL•
PA/RX
DIM
Speaker mode.
• "
" scrolls at the channel comment indicator.
• To adjust the audio output level, push [Y] or [Z] while pushing
[VOL•
].
DIM
PA/RX
w To cancel the RX Speaker mode, repeat step q.
• "
" scrolls at the channel comment indicator.
] for 1 sec. to enter the RX
Hide quick links:
Advertisement
Table of Contents
