I Dsc Address Id - Icom IC-M422 Instruction Manual

6
DSC OPERATION

I DSC Address ID

A total of 100 DSC address IDs (9-digit) can be programmed
and named with up to 7 characters.
D Programming Address ID
q Push [DSC•
] to enter the DSC menu.
POS
w Push [Y] or [Z] to select "
e Push [Y] or [Z] to select "
14
," push [DSC• ].
POS
," push [DSC• ].
POS
r Push [Y] or [Z] to set the 9-digit Individual/Group ID.
• Push [CH/WX• ] or [16•
DUAL
backward, respectively.
• Push [LO/DX ] to cancel and exit the condition.
•IC
1st digit '0' is fixed for a Group ID. When you input 1st digit '0'
and other 8 digits, the ID is automatically registered as a
Group ID.
t After entering the 9-digit code, push [DSC•
to a 7-character ID name using [Y] or [Z].
• Push [CH/WX• ] or [16•
DUAL
backward, respectively.
• Push [LO/DX ] to cancel and exit the condition.
•IC
y Push [DSC•
] to program and exit the DSC menu.
POS
] to move the cursor forward or
9
] to set up
POS
] to move the cursor forward or
9