Set Mode; I Set Mode Programming - Icom IC-M402A Instruction Manual

8

SET MODE

I Set mode programming

Set mode is used to change the conditions of the trans-
ceiver's functions: Scan type (Normal or Priority,) Scan re-
sume timer, Weather alert, Dual/Tri-watch, DSC watch, Beep
tone (transceiver,) LCD contrast and Auto ACK.
Available functions may differ depending on dealer setting.
D SET MODE CONSTRUCTION
Auto acknowledgement
Scrolls
LCD contrast
30
D Set mode operation
q Turn power OFF.
w While pushing [16•
e After the display appears, release [16•
r Push [16•
t Push [Y] or [Z] to select the desired condition of the item.
y Turn power OFF, then ON again to exit Set mode.
Scan type
Starting item
Push
Beep tone
], turn power ON to enter Set mode.
9
• " " appears at the channel comment indicator.
] to select the desired item, if necessary.
9
Scan resume timer
DSC watch
Scrolls
].
9
Weather alert
Dual/Tri-watch