Icom IC-M402A Instruction Manual page 30

6
DSC OPERATION
D Transmitting Position Report call
Transmit a Position Report call when you want to announce
your own position to a specific ship and to get an answer, etc.
q Push [DSC•
] to enter the DSC menu.
IC
w Push [Y] or [Z] to select "
[DSC• ].
IC
e Push [Y] or [Z] to select the desired pre-programmed in-
dividual address.
• The ID code for the position report call can be set in advance.
(p. 15)
24
," and push
Scrolls
r Push [DSC•
] to enter the standby condition for Position
IC
Report call.
• Channel 70 is selected and "
t Push [DSC•
] to transmit the Position Report call.
IC
y After the Position Report call has been transmitted, stand
by on Channel 70 until an acknowledgement is received.
• " " scrolls at the channel comment indicator.
u Push any key to exit the condition and return to the nor-
mal operation.
" appears.
Scrolls